Taş kırma ve eleme tesisi, agrega üretimi için kullanılan bir tesis türüdür. Bu tesisler, büyük kaya parçalarını kırarak, çeşitli boyutlarda agrega (kum, çakıl, mıcır) üretir. Üretim aşamaları genellikle şu şekildedir:

  1. Malzeme Besleme: Büyük kaya parçaları, ekskavatör veya loder ile besleme bunkerine yüklenir.

  2. Primer Kırma: Besleme bunkerinden gelen malzeme, primer kırıcıya (çeneli kırıcı veya darbeli kırıcı) gönderilir. Bu aşamada büyük kaya parçaları daha küçük boyutlara indirgenir.

  3. Konveyör Bantlar: Kırılan malzeme, konveyör bantlar vasıtasıyla eleme ünitesine taşınır.

  4. Eleme: Eleme ünitesinde, kırılan malzeme boyutlarına göre ayrılır. İstenilen boyuttaki agrega, stok alanına gönderilirken, büyük boyutlu malzeme sekonder kırıcıya gönderilir.

  5. Sekonder Kırma: Eleme sonrası büyük kalan parçalar, sekonder kırıcıda (konik kırıcı veya darbeli kırıcı) tekrar kırılır.

  6. Stoklama ve Sevkiyat: Son olarak, istenilen boyutlara getirilen agrega, stok alanında biriktirilir ve sevkiyata hazır hale getirilir.

English:

A crushing and screening plant is a type of facility used for aggregate production. These plants crush large rock pieces to produce aggregates (sand, gravel, crushed stone) of various sizes. The production stages are generally as follows:

  1. Material Feeding: Large rock pieces are loaded into the feeding hopper using an excavator or loader.

  2. Primary Crushing: The material from the feeding hopper is sent to the primary crusher (jaw crusher or impact crusher). In this stage, large rock pieces are reduced to smaller sizes.

  3. Conveyor Belts: The crushed material is transported to the screening unit via conveyor belts.

  4. Screening: In the screening unit, the crushed material is separated according to size. The aggregate of the desired size is sent to the stock area, while larger-sized material is sent to the secondary crusher.

  5. Secondary Crushing: The remaining large pieces after screening are crushed again in the secondary crusher (cone crusher or impact crusher).

  6. Stockpiling and Shipping: Finally, the aggregate, which has been brought to the desired sizes, is stockpiled in the storage area and prepared for shipment.